Description
Key Technical Specifications
- Model Number: GE IC698CRE040-HN
- Manufacturer: GE Fanuc / Emerson Automation
- Series: PACSystems RX7i
- Processor Type: Intel Pentium M
- Clock Speed: 1.8 GHz
- Memory: 64 MB RAM, 64 MB Non-volatile Flash
- Scan Rate: 0.024 ms per 1K Boolean contacts/coils
- Serial Ports: Two (2) RS-232/RS-485 ports
- Ethernet Ports: Two (2) 10/100 Mbps RJ45 ports
- Power Requirement: 6.8A @ 5VDC, 0.003A @ ±12VDC
Functional Role & Application Analysis
The GE IC698CRE040-HN is the central processing unit for the PACSystems RX7i platform. It is a high-performance CPU designed to handle complex control logic, motion control, and extensive I/O scanning in demanding industrial environments. Powered by a 1.8 GHz Pentium M processor and equipped with 64 MB of RAM, it provides the computational horsepower needed for large-scale distributed control systems.
This module solves the challenge of integrating high-speed processing with robust communication. It features dual Ethernet ports and dual serial ports natively, allowing it to act as a central hub for SRTP, Modbus TCP, and EGD data exchange. It also supports high-availability redundant configurations, ensuring continuous operation in critical infrastructure.
- Use Case 1: Primary controller for power generation and water treatment DCS/SCADA systems.
- Use Case 2: High-speed motion control and complex algorithm execution in petrochemical plants.
- Use Case 3: Critical maintenance and replacement for aging RX7i CPU modules in legacy infrastructure.
Our Quality Standard & Testing Process
We understand that the cost of an unreliable CPU is far greater than its purchase price. A failed processor can halt an entire production facility. We have established a rigorous, multi-stage testing process to ensure every GE IC698CRE040-HN we ship is 100% functional.
- Visual & Component Inspection: All modules undergo professional cleaning and visual inspection to ensure no physical damage, corrosion, or compromised components.
- Live System Test: The module is installed in a live PACSystems RX7i test rack and run for a minimum of 24 hours to verify continuous operation, thermal stability, and backplane communication.
- Full-Function Diagnostics: We test dual Ethernet and serial port communications, verify 64 MB memory integrity, and validate scan rate performance under load.
- Warranty Backing: Only parts that pass all diagnostic tests are approved for shipment and backed by our full 12-month warranty.
GE IC698CRE040-HN
Compatibility & Migration Paths
To ensure this GE IC698CRE040-HN is 100% compatible with your system, you must check these key compatibility points. Failure to verify this is a common project risk that can lead to extended downtime.
- Firmware/Hardware Revisions: You must confirm your existing Proficy Machine Edition software version supports this CPU. Older software versions may not recognize newer hardware revisions.
- Required Components: This CPU requires a compatible RX7i power supply (e.g., IC698PSA350) and an RX7i chassis. It is NOT compatible with RX3i chassis.
- Replacement & Alternatives: The IC698CRE040-HN is a direct replacement for older IC698CRE040 revisions. If you require higher performance, consider upgrading to the IC698CPE040 series.
- Get Expert Help: Unsure about your system compatibility or firmware version? Contact our technical team today for a free compatibility check.
